📦 Free Shipping* Australia-Wide over $150. T&Cs apply

💨 Get it fast with Express Post for only $14.95*

SUMMER SALE – UP TO 40% OFF CAMP, HIKE, SWIM, BIKE, CLIMB & SNOW•NEMO · ORCA · XTM · MAMMUT · DEUTER · SEA TO SUMMIT & MORE•PRICE MATCH ON AUSSIE STORES – JUST ASK•

Pressure Drive Cfh

$129.38
New arrival


  • Simple Returns

  • Super shipping

  • Price Guarantee

Description

The Lezyne Pressure Drive CFH is a 190 mm aluminium hand pump that doubles as a CO2 inflator. Its steel-braided CO2 Flex Hose takes a threaded cartridge to dispense gas, or attaches to the pump barrel for hand pumping, and the Flip-Thread Chuck fits Presta and Schrader valves. One 16 g cartridge in a neoprene sleeve and Lezyne's CFH mounting hardware are included.

Two ways to inflate from one tool

A CO2 cartridge is used up once it is emptied. The Pressure Drive CFH carries both options in one body. With a cartridge threaded into the hose, the hose works as the CO2 dispenser. With the hose moved to the pump barrel, the same hose and chuck become a hand pump, so you still have a way to add air once the cartridge is gone.

Valves and cartridges

  • Valves: the Flip-Thread Chuck has a Presta end and a Schrader end. Match the end to your valve and thread it onto the open valve.
  • Cartridges: threaded CO2 only.
  • Presta with removable cores: Lezyne's quick guide says to take the core out before pumping, put a small amount of LOCTITE thread locker on its threads, refit it firmly and leave it 24 hours before first use.

Using the CO2 hose

Thread the chuck onto the valve, then screw the cartridge fully into the hose to puncture it. Backing the cartridge off by half a turn releases the gas. Lezyne warns that some leftover CO2 can escape when the hose comes off the valve.

Carrying it

The pump measures 190 × 52 × 30 mm, with a CNC-machined aluminium body, piston and handle in gloss black. The hose stows in the pump handle between uses. Lezyne says the pump mounts to the frame or slides into a jersey pocket, and CFH mounting hardware comes in the box.

Cartridge safety

CO2 cartridges are under pressure. Lezyne's instructions say not to puncture them or heat them above 49 °C, not to inhale the gas or point it at your face or body, and not to leave cartridges in a closed vehicle, where overheating can rupture them. Keep cartridges and the dispenser away from children.

In the box

  • Pressure Drive CFH pump with integrated CO2 Flex Hose
  • One 16 g threaded CO2 cartridge with insulated neoprene sleeve
  • CFH mounting hardware

Specifications

  • Material
    CNC-machined aluminium body, piston and handle; steel-braided hose
  • Connector Type
    Flip-Thread Chuck, threaded (Presta and Schrader ends)
  • Compatibility
    Presta and Schrader valves; threaded CO2 cartridges only
  • Length
    190 mm (190 × 52 × 30 mm)

Sizing Guide

Additional Information

Compatible with threaded CO2 cartridges only. In the box: the Pressure Drive CFH pump with integrated CO2 Flex Hose, one 16 g threaded CO2 cartridge with an insulated neoprene sleeve, and CFH mounting hardware.

FAQ's

Does the Lezyne Pressure Drive CFH work with Presta and Schrader valves?
Yes. The Lezyne Pressure Drive CFH uses a Flip-Thread Chuck with one end for Presta and one for Schrader. You thread the matching end onto the open valve. On Presta valves with removable cores, Lezyne advises securing the core with thread locker first.

What CO2 cartridges does the Lezyne Pressure Drive CFH take?
The Lezyne Pressure Drive CFH works with threaded CO2 cartridges only, which screw into the CO2 Flex Hose. One 16 g threaded cartridge comes in the box, fitted with an insulated neoprene sleeve.

How do you inflate a tyre with CO2 on the Lezyne Pressure Drive CFH?
Thread the chuck of the Lezyne Pressure Drive CFH onto the open valve, then screw the cartridge fully into the hose to puncture it. Unscrew the cartridge half a turn to release the CO2. Some leftover gas can escape when you remove the hose.

Can the Lezyne Pressure Drive CFH be used as a normal hand pump?
Yes. Take the CO2 Flex Hose out of the pump handle, attach one end to the pump barrel and thread the chuck at the other end onto the open valve. The Lezyne Pressure Drive CFH then inflates like a regular hand pump, with no cartridge needed.

How do you carry the Lezyne Pressure Drive CFH on the bike?
Lezyne says the Pressure Drive CFH mounts to the frame or slides into a jersey pocket, and CFH mounting hardware comes in the box. The pump measures 190 × 52 × 30 mm.

Do Presta valves need preparing before using the Lezyne Pressure Drive CFH?
Only Presta valves with removable cores. Lezyne's quick guide for the Pressure Drive CFH says to take the core out, apply a small amount of LOCTITE thread locker to its threads, refit it firmly, then leave it 24 hours before first use.

Can you leave spare CO2 cartridges for the Lezyne Pressure Drive CFH in a car?
No. Lezyne's instructions for the Pressure Drive CFH say not to leave CO2 cartridges in a closed vehicle, because overheating can make them rupture. Cartridges should not be heated above 49 °C, and should be kept away from children.